Filter
Top Products
Setup 6-23
If you forget your password, you must reset the configuration values stored in
CMOS to defaults. Resetting CMOS requires opening up the system unit, so
contact your dealer for assistance.
Removing a Password
If you enter Setup using the user password, you cannot modify
or remove the supervisor password.
To remove a password, select the desired password to remove and press
]
or
[
.
6.6.2 Diskette Drive Control
This parameter allows you to enable or disable the read/write functions of the
floppy drive. The following table summarizes the available options.
Table 6-2 Diskette Drive Control Settings
Setting Description
Normal (default) Floppy drive functions normally
Write-Protect Disables any floppy drive write function. This function protects
all sectors only under DOS mode.
Disabled Disables the floppy drive