Actiontec electronic GT704WG Network Router User Manual


 
22
Actiontec 54 Mbps Wireless DSL Gateway User Manual
23
Chapter 4 Configuring Wireless Settings
WPA
Activating WPA (Wi-Fi Protected Access) in the Wireless Advanced Settings
screen generates the “Wireless WPA Settings” screen.
There are two levels of WPA. “Pre-Shared Key (PSK) for Home Network” is for
home network security. To set up a PSK (Pre-Shared Key), enter 8-63 alphanu-
meric characters in the text box. All wireless-enabled devices must support WPA
and know the PSK to join the network.
The “Group Key Interval,” “Server IP Address,” “Port,” and “Secret” text boxes are
enterprise network specific, and should only be accessed by an information sys-
tems professional. See “WEP+802.1x” on the previous page for more information.
When finished with this screen, click Apply to save all changes. To return to the
Wireless Advanced Settings screen, click Back.
ESSID Broadcast
Selecting ESSID Broadcast in the Wireless Advanced Settings screen generates the
“ESSID Broadcast” screen.
To prevent a unwanted computers from joining the Gateway’s wireless network by
using an ESSID of “Any,” select Disable in the ESSID Broadcast screen. To broad-
cast the wireless network’s ESSID, select Enable.
When finished with this screen, click Apply to save all changes. To return to the
Wireless Advanced Settings screen, click Back.