Filter
Top Products
30
Actiontec 54 Mbps Wireless DSL Gateway User Manual
31
Chapter 5 Configuring Advanced Settings
DSL Settings
To access DSL Settings, select DSL Settings from the “Advanced Setup” screen. The
Gateway’s VPI, VCI, Mode, and QoS (Quality of Service) settings can be changed
from this screen. Actiontec recommends not changing these values without first
consulting the ISP.
DHCP Settings
Selecting DHCP Settings in the “Advanced Setup” screen generates the “DHCP
Settings” screen. The Gateway has a built-in DHCP (Dynamic Host Configuration
Protocol) server that automatically assigns a different IP address to each computer
on the network, eliminating IP address conflicts.
The factory default setting is On. To disable the DHCP Server, select Off, then
click Apply.