Filter
Top Products
Chrysler Diagnostics
7 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
Use the
UP/DOWN
arrow keys to scroll
through the codes. Write down the
codes for reference or print them later.
The DTCs are categorized by ENG (engine) or TRANS (transmission). The
Chrysler MIL code (3-digit) and SAE code (5-digit) follow on the first line.
There may be times where only one or both display. Dashes display if the DTC
type does not exist.
Note the codes and press
BACK
to return to the Chrysler Functions list.
READ TEMPORARY CODES
✓ For JTEC and SBEC III Equipped Vehicles Only.
The Read Temp Codes (Read Temporary Codes) function is used on vehicles
equipped with Jeep and Truck Engine Controllers (JTEC) and SBEC version III
modules. The function enables the tool to retrieve and display all DTCs that
failed one trip but did not turn on the MIL light. If the vehicle does not support
this function, then the tool will not display it.
Select Read Temp Codes from the
Chrysler Functions list and press
ENTER
.
Keep hands and Tools away from fan and engine during
test.
Next, turn the ignition key On-Engine can be Off or Running.
Once the tool has completed reading the temporary DTC s, one of two screens
display:
ENG: 31/P0443
EVAP Purge Solenoid
Circuit
~
ENG: 31/P0443
EVAP Purge Solenoid
Circuit
~
TRANS: 18/P1792
Battery ]
Disconnected [
(In Last 50 Cycles)
~
ENG: 7/----
Boost Limit
Exceeded
~
ENG: ---/P0010
Camshaft Position ]
Actuator A - Bank 1[
Circuit Malfunction
~
Chrysler Functions ?
1)Read Codes
` 2)Read Temp Codes
[
3)Erase Codes
~
!
CAUTION
Use S To View Code.
Write Down Codes
For Reference
~
System Pass:
No Faults Detected.
~