Filter
Top Products
Chrysler Diagnostics
7 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
One sensor will be displayed per
screen. Use the
UP/DOWN
arrow keys
to scroll through the supported sensors.
The tool displays the status of the
sensor.
Press the
BACK
or
FUNC
key to end the test and return to the Chrysler
Functions list.
CONTROLLER INFO
Controller Information provides additional specifications on the PCM and
vehicle under test, such as:
• Internal PCM ID number
• Emission Type (Federal, California, Canadian, etc.)
• Fuel type
• Model year of car (controller)
• Turbo or non-turbo engine
• Engine Controller type
• Engine size
• Car or truck application
• Transmission type
• Drivetrain layout (front or rear drive)
✓ Controller Information varies from vehicle to vehicle.
Select Controller Info from the
Chrysler Functions list and press
ENTER
.
Turn ignition key On-Engine can be Off
or Running. Press
ENTER
and the
scan tool will build the Controller Info
list.
After retrieving the Controller Infor-
mation, the tool displays the informa-
tion. Scroll through the list using the
UP/DOWN
arrow keys.
Press the
BACK
or
FUNC
key to end the test and return to the Chrysler
Functions list.
RESET EMR LAMP
✓ (Trucks and Vans Only)
The Reset EMR Lamp function should be performed after servicing the
vehicle’s emissions control systems. Some Chrysler vehicles are equipped with
an Emission Maintenance Reminder (EMR) lamp. The EMR is illuminated after
the vehicle is driven a pre-programmed number of miles. The tool can do this
by resetting the EMR odometer inside the vehicle PCM.
Viewing Sensor:
ADPT FUEL(%) 5.00
[
~
Chrysler Functions ?
9)Sensor Test
]
` 10)Controller Info
[
11)Reset EMR Lamp
~
Controller Info:
1995
3.5L
[
ID# 135278289309847
~