Filter
Top Products
Chapter 1: Installing the Modem
MM701G and MM702G User Manual 3
STEP 4—CONNECT CABLES
Install cables for the Ethernet port (“Connect the 10Base-T Port” below). Then check LED
status on page 5.
Connect the 10Base-T Port
Set the modem MDI/MDI-X switch for the
10Base-T port to allow the modem to connect
directly to other network devices such as a PC,
hub, switch, or router.
1 Set the modem MDI/MDI-X switch to one
of the following:
• MDI-X when connecting to a device
such as a PC Ethernet NIC card that
has an MDI port
• MDI when connecting to a device such
as a hub, switch, or router that have
MDI-X ports
For connection to
devices such as
a PC Ethernet NIC
For connection to
devices such as a
hub, switch, or route
r
MDI-X
MDI
M0325-A