Filter
Top Products
Chapter 3: Configuring the LAN
MM701G and MM702G User Manual 19
2 Select one of the following three DHCP server modes as indicated by your LAN
administrator, then click
Configure:
•
Disabled—DHCP server mode is not enabled. If you do not enable DHCP server for the
modem, you must enter a default gateway for each client on your LAN (such as PCs)
and also an IP address for a DNS server. Either the service provider or your LAN
administrator will provide you these IP addresses to enter in the Internet Protocol
(TCP/IP) setup for your PC (or other LAN clients). See “Assign IP Addresses” on
page 7 for information about how to access this dialog. The following is an example
of the dialog and fields that must be filled in (example is from Windows 2000; the
dialog for other operating systems may be slightly different).
DHCP default gateway
IP address
DNS server IP address
Set Internet protocol to: Use
the following IP address: