Filter
Top Products
Configure the LAN
14 MM701G and MM702G User Manual
CONFIGURE THE LAN
From the LAN Configuration page, configure the parameters for the
LAN as indicated by your system administrator. The default protocol
for the LAN port is bridged.
1 Select
LAN on the menu bar, then select LAN Setup under [LAN Options] to access the LAN
Configuration
page.
2 Configure the following parameters:
LAN Protocol
The LAN protocol is set to bridged and cannot be changed through the Web interface.
If you want to change the protocol to routed, use the command-line interface (go to
“Set Up the LAN” on page 104).
LAN
LAN Setup