Filter
Top Products
Manage WAN Sessions
116 MM701G and MM702G User Manual
PPP Authentication
Enter 13 then select the authentication protocol provided by your service provider for
PPP sessions. The authentication protocol type must match at the modem and the
service provider. The options are:
•
1—NO Authentication is required for the session.
•
2—PAP where the modem sends authentication requests to the service provider
and authentication occurs only once during the life of the link.
•
3—CHAP where the service provider returns an authentication challenge to the
modem during the authentication.
User Name
Enter 14 then type the login name for this PPP session to the Login name supplied by
the service provider. Minimum login name length is one character and the maximum
is 32 characters.
User Password
Enter 15 then type the login password for this PPP session to the Login password
supplied by the service provider. Minimum password length is six characters and the
maximum is 32 characters.
2 Enter
16 to Apply new setting to add the new RFC1483 bridged session to your session list.
Or, you can Enter
17 to Delete session.
Permanently Save Sessions
After you have set up all the WAN sessions, select Save Current configuration from the System
Management
main menu as described in “Saving the Current Configuration” on page 131 or the
changes will be lost if you reboot or power cycle the modem.