Filter
Top Products
Manage WAN Sessions
106 MM701G and MM702G User Manual
Change LAN Protocol
Enter 6 then select one of the following to change the LAN Protocol:
•
1—Bridging protocol
• 2—Routing protocol
3 Select Save Current configuration from the Main Menu as described in “Saving the Current
Configuration” on page 131 or the changes will be lost upon reboot or power cycle.
MANAGE WAN SESSIONS
From the System Management main menu (page 102), enter 1 to display the WAN Session
Management
menu. The WAN Session Management screen displays the available options.
.
A total of 32 WAN sessions can be created using the protocols listed below. Ensure, however,
that you do not exceed the maximum limit per protocol type as shown below:
• RFC 1483-Bridge (up to 8 sessions)
• RFC 1483-Router (up to 16 sessions)
• PPPoA or PPPoE (up to 8 sessions for either type)
M0029-A