Filter
Top Products
Chapter 2. Installation
61202.153L3-1 Express XRT User Guide 15
Using the Express Configuration Wizard
Use one of the following methods to start the Express Configura-
tion program:
For Windows 95 and WIndows NT 4.0:
From the Start button, choose Programs, then ADTRAN, then Ex-
press Configuration.
For WIndows 3.x and WIndows NT 3.51:
Open Program Manager. Double-click the Adtran icon and then
the ISDN icon. Double-click Express Configuration.
For the Macintosh operating system:
1. Open the Adtran ISDN folder. Double-click the Express Con-
figuration icon.
2. The program attempts to auto-detect an Express XRT on COM
ports 1-4.
Press Configuration (for Windows 95 and Windows NT 4.0) only auto-
detects COM ports 1 through 4. Express Configuration for the Macin-
tosh auto-detects COM ports 1 through 12.
3. If auto-detection is successful, the screen shown in Figure 2-5
displays. Go to step 5.
4. If auto-detection is unsuccessful, the screen shown in Figure 2-
4 displays.
Figure 2-4
Unable to Auto-Detect
5. Select Cancel. The screen shown in Figure 2-5 on page 16 dis-
plays.