Filter
Top Products
Chapter 2. Installation
61202.153L3-1 Express XRT User Guide 23
Exit
Exits the Tray Tool.
Installing Windows 95 Dial-Up Networking
Dial-Up Networking for Windows 95 is most commonly used for
connections to Internet Service Providers or other networks.
Use the following procedure to install Windows 95 Dial-Up Net-
working:
1. From Start, choose Settings, then Control Panel, then double
click Add/Remove Programs.
2. Double click on the Communications option under the Win-
dows Setup tab.
3. If not already selected, check Dial-Up Networking.
4. Click OK to select these changes.
5. Click OK to begin installation of Dial-Up Networking.
6. Restart the computer.
7. Once Windows boots, from Start, choose Settings, then Con-
trol Panel, then double click Network.
8. From the Network list, verify the following components are in-
stalled: Dial-Up Adapter and TCP/IP for Dial-Up Adapter. If
you intend to use your Express XRT for Internet access, these
should be the only components needed. Verify the software
setup from your Internet Service Provider or network adminis-
trator to ensure that the networking components are set up
properly.
9. Click OK once you have verified that these components are in-
stalled.
10.To create a Dial-Up Networking connection select My Com-
puter, then choose Dial-Up Networking. The first time Dial-
Up Networking has been used, the Welcome to Dial-Up Net-
working menu appears.
11.Click NEXT.
12.Enter the name for this connection and select the ADTRAN Ex-
press XRT from the modem list. You may configure DTE
speed and server information by choosing the Configure but-
ton next to the selected modem.
13.Click NEXT.