Filter
Top Products
Chapter 2. Installation
18 Express XRT User Guide 61202.153L3-1
Figure 2-8
Express Configuration Wizard Connection Tab
9. To automatically detect the required information, click the
Auto-Detect button.
Express Configuration for Windows 95 and Windows NT 4.0 only auto-
detects COM ports 1 through 4. Express Configuration for the Macin-
tosh auto-detects COM ports 1 through 12.
To manually enter the settings, select the appropriate options. Select Ap-
ply Settings.
After installation is complete, the Express XRT is ready for use. If
any error screens are encountered or the unit remains at Link
Down for longer than 15 minutes, see Troubleshooting on page 53.
Auto-Detect SPIDs/Switch Type (Expert ISDN)
This option only applies to North American switches.
Auto-detection of SPIDs and Switch Type greatly reduces the like-
lihood of time-consuming problems occurring during installation
of the Express XRT. It evaluates common SPID formats based on
the area code and phone numbers and reports success after plac-
ing a test call.