Filter
Top Products
Appendix B. Current Status Messages
94 ISU 128 User Manual 61202.029L2-1
Link down
The network interface is not active.
LPBK DTE Port
The DTE connector is looped back in the DTE direction.
LPBK Protcl Net
The ISU 128 has been commanded to perform a loopback in the network direc-
tion after letting the incoming data pass through the current protocol.
NEC Ready
The ISU 128 is connected to an NEC switch and is ready to place/receive calls.
NET EOC LOOPBACK
The ISU 128 has been commanded to perform an ISDN loopback toward the
network.
NET REM LOOPBACK
The ISU 128 is performing a V.54 or DDS latching loopback toward the net-
work.
Register SPID #1
The ISU 128 is registering its first SPID with the network.
Register SPID #2
The ISU 128 is registering its second SPID with the network.
RINGING
The phone number just dialed is ringing.
xxxx nnnn
A rate adaption is running at the bit rate specified by nnnn.
xxxxx Quitting
A rate adaption protocol is turning off.
xxxxx Ready
A rate adaption protocol is ready.
xxxxx Setup
A rate adaption protocol is setting up.