Filter
Top Products
:ANAPURNA XL² OPERATOR MANUAL
AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
31
]
8/08/2008
]
9.2. Rigid Media
9.2.1. Rigid Support tables
- One table for use on the front, and one table for use on the back are delivered
with the machine. (Standard table; full engine width, and 1.20m long)
9.2.2. Rigid Alignment
9.2.2.1. Media Register Pins and side guiders:
When turning the upper “Media Set” button to position 1, the left side pin –
indicated as ‘1’ in the below picture, goes down. This is the side alignment pin of
your first rigid (rigid A). This rigid can be small or even have full engine width.
When you turn the upper “Media Set” button to position 2, also side alignment pin
nr.2 in the below picture will come down, allowing you to load two rigid media.