Filter
Top Products
:ANAPURNA XL² OPERATOR MANUAL
AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
45
]
8/08/2008
]
11.2.9. White weep:
This option allows the user to disable the weeping of white ink when the shuttle is
set in purge position. Agfa’s advise is to leave the option permanently ON
Agfa’s advise is to leave the option permanently ONAgfa’s advise is to leave the option permanently ON
Agfa’s advise is to leave the option permanently ON; The
The The
The
only application of this choice is to disable the weeping when white ink is not
only application of this choice is to disable the weeping when white ink is not only application of this choice is to disable the weeping when white ink is not
only application of this choice is to disable the weeping when white ink is not
loaded into both white ink heads, but both white heads are filled with cleaning
loaded into both white ink heads, but both white heads are filled with cleaning loaded into both white ink heads, but both white heads are filled with cleaning
loaded into both white ink heads, but both white heads are filled with cleaning
solut
solutsolut
solution. Nevertheless, the customer has to purge a few times a day a little
ion. Nevertheless, the customer has to purge a few times a day a little ion. Nevertheless, the customer has to purge a few times a day a little
ion. Nevertheless, the customer has to purge a few times a day a little
cleaning thru the heads to renew the cleaning into the heads (cleaning will go out
cleaning thru the heads to renew the cleaning into the heads (cleaning will go out cleaning thru the heads to renew the cleaning into the heads (cleaning will go out
cleaning thru the heads to renew the cleaning into the heads (cleaning will go out
the heads because the cleaning does not gets the underpressure to stay into the
the heads because the cleaning does not gets the underpressure to stay into the the heads because the cleaning does not gets the underpressure to stay into the
the heads because the cleaning does not gets the underpressure to stay into the
heads.
heads. heads.
heads.
11.2.10. White head location:
This choice is fixed by the construction of the engine (a pre-white head), and
should never be changed.
11.2.11. Options to be changed behind password:
This button will ask for the service password to change parameters at install time.
It can only be used by an Agfa trained technician.
11.2.12. Head Offset:
These are the Head alignment settings for each head, in reference to
the Black head. This alignment is done in advance by an engineer,
do NOT change these values!