Filter
Top Products
84
Reset (12): Unselect all mappings.
After you finish with all settings, please click ‘Apply’ (13) button and the following
message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
3-2-3 Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN port) to a
specified port of an IP address on local network, so you can setup an Internet service on
the computer on local network, without exposing it on Internet directly. You can also build
many sets of port redirection, to provide many different Internet services on different local
computers via a single Internet IP address.
Please click ‘NAT’ menu on the left of web management interface, then click ‘Virtual
Server’, and the following message will be displayed on your web browser: