Filter
Top Products
OmniSwitch 6600 Family Chassis and Hardware Components OmniSwitch 6602-48
OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-17
OS6602-48 Specifications
Total number of 10/100 Mbps
ports per switch
48
Total number of Gigabit Ether-
net ports per switch
2
Total number of 10/100 Mbps
ports per stack
384 (stack of eight switches)
Total number of Gigabit Ether-
net ports per stack
16 (stack of eight switches)
Fabric capacity 10.0 Gbps full duplex; 20.0 Gbps aggregate
Current draw Approximately 0.4 Amps @ 115VAC
Power Approximately 46 Watts @ 25C
Total power supplies 2 (one factory-installed power supply and
one optional backup power supply)
Flash memory size 64 MB
RAM memory size 128 MB
Overall Width (rack-mount
flanges included)
18.95 inches
Chassis Width (rack-mount
flanges not included)
17.25 inches
Height 1.75 inches
Height (rack units) 1 RU
Chassis Depth 16.95 inches
Chassis Weight Approximately 12.0 lbs
Humidity 5% to 90% Relative Humidity (Operating)
0% to 95% Relative Humidity (Storage)
Altitude Sea level to 10,000 feet (3 km)
10/100 Ethernet Port Specifications
Connector type RJ-45
Standards supported IEEE 802.3u, IAB RFCs 826, 894
Data rate 10 or 100 Mbps (full or half duplex)
Maximum frame size 1518 Bytes; 1522 Bytes with IEEE 802.1Q tags
Connections supported 10BaseT hub or device; 100BaseTX hub or device
Cable supported 10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568
or shielded twisted-pair (STP), Category 5, 100 ohm
Maximum cable distance 100 meters