Filter
Top Products
PC*MILER|AS/400 MVS User’s Guide
21
The Name of Mileage Request or Input data queue, and the library in
which the queue resides, are logged. The number underneath the data
queue name and library is the connection status return code. Good
returns are:
0 Connection Good Created Data Queue
2 Connection Good Found Data Queue
Return codes of 1 or 3 are generic error codes that indicate problems with
your NS Router or Client Access Express connections.
⇒
⇒⇒
⇒
NOTE: Both the PC and the AS/400 must agree on the location of the
Input or Request data queue. To change the location on the PC, click
on the mileage server’s File menu. Choose AS/400 Control, then
Change Library/Queue. The change is made on the AS/400 by running
the ALKMVS/config command and filling out the library field.
The server log only notes incoming requests. If you need to see the
mileage server’s outputs, turn on the Log to File feature by selecting the
mileage server’s File menu and choosing AS400 Control > Highlight Log
to File. This will create a file called c:\ALKMVS\as400.log It is
recommended to only use logging for diagnostic purposes, otherwise the
log files tend to grow large.
Stopping the Interface
To close PC*MILER|TCP/IP Connect, click Exit in the File menu. From
the PC*MILER|AS/400 Multiple Version Switch window, choose Exit from
the File menu.
⇒
⇒⇒
⇒ NOTE: If you are closing your router, remember to disconnect the
AS/400 beforehand. Please be patient, the PC*MILER mileage server
can take a minute or two to exit. Be sure to disconnect the Netsoft Router
from the AS/400 before closing the router. Failure to do so may result in
having to reboot the PC before you can reconnect to the AS/400. It is not
necessary to manually disconnect a Client Access Express connection.