Filter
Top Products
56
PC*MILER|AS/400 MVS User’s Guide
Appendix B: Configuring an N/S Router For Use With
PC*MILER AS/400
Unless you have a twinax connection, configure your router using the
AnyNet protocol. AnyNet needs to be enabled on the AS/400 (see
Appendix D: Configuring AnyNet on the AS/400).
For PC*MILER Version 14 (or higher) and any PC*MILER|Streets
version,
you must have the N/S Router version 3.0 or higher.
Check by selecting HELP > About in the NS/Administrator or the midrange
workspace. NOTE: If you need to upgrade your NS Router, you must
reinstall the PC*MILER AS/400 interface afterwards. The PC*MILER
interface is built on a specific Netsoft Data Queue DLL that is available
only on the PC*MILER interfaces CD.
To start the configuration, go to the N/S Administrator, right click on the
N/S Router, and choose Properties.