Filter
Top Products
AT-29xx Series Gigabit Ethernet Network Adapters Installation Guide
19
AT-29xx Series Adapter Software Drivers
An AT-29xx Series adapter is shipped from the factory with the default
Broadcom software driver installed. To update the software driver, you
have two options:
If your system has an Internet connection, you can download the AT-
29xx software driver from the Microsoft’s Update Manager. This utility
is accessed through the Start button. However, the Microsoft Update
Manager may not have the latest Allied Telesis software drivers.
You can download the latest version of the software driver from the
Allied Telesis website at www.alliedtelesis.com/support/software.
This manual provides instructions to download the software driver from the
Allied Telesis website and install it on your adapter.
Supported
Operating
Systems
The AT-29xx Series Adapters support software drivers on the following
operating systems:
Windows Server 2003
Windows XP
Windows 2008 R2
Windows Vista
Windows 7
Linux
Novell NetWare
MS-DOS
Software Driver
Features
The following is a list of the AT-29xx Series Gigabit Ethernet Network
adapters features for all of the supported operating systems:
Flow Control (IEEE 802.3X)
Jumbo frames (9 KB)
Layer 2 Priority Encoding (802.1P)
Adaptive interrupt frequency
Integrated 96 KB Frame Buffer Memory
Support for PXE
Load balancing
Note
Novell NetWare 5.1 does not support Jumbo Frames.