Filter
Top Products
Chapter 2: Installing the Hardware
28
6. Secure the network adapter card to the chassis with a Phillips-head
screw (not provided) as shown in Figure 4.
Figure 4. Securing the Adapter Card
7. Replace the system’s cover and secure it with the screws removed in
Step 2.
8. Disconnect any personal antistatic devices.
9. Power the system on.
Note
If you installed the adapter card in a Microsoft Windows Operating
system before installing the driver software, the Found New
Hardware Wizard launches automatically. For more information,
refer to the chapter for your Windows Operating system.
Once the system returns to proper operation, the adapter hardware is fully
installed. Next, connect the network cables. See “Connecting the Network
Cables” on page 29.