AT-8116 User’s Guide
2-5
Finally, the user may press <?> to see the list of commands which
start with the text he has already typed, eg: User pressed <?>
SYS_console>get-c?
?
command 'get-c' not found
SYS_console>get-co?
Command Line Interface Structure
The CLI has several categories of commands:
❑ Console related commands: help, banner, console parameters
setup, etc.
❑ System related commands: reset commands, download
commands, initialize the NVRAM with defaults, etc.
❑ IP commands: parameter setup, parameter and information
display, etc.
❑ SNMP agent related commands: parameter setup,
management and traps options
❑ Switching Database related commands: aging time
management and Switching Database entry management
❑ Virtual LAN commands
❑ Port Configuration related commands
❑ Switching statistics commands
❑ Spanning Tree related commands
See the quick reference at the end of this chapter for a command list
separated by subject.
Table 2-2 Commands Matching <get-c>
get-comm show current read or/and write community
get-con-matrix retrieves the VLAN connectivity matrix
get-colls-cnt gets the collision distribution counters per port