Filter
Top Products
Command Line Reference
C-2
Table C-2 System Commands
sys-stat Show system status
get-stst-level Show self-test level of switch
set-stst-level Change the self-test level
warm-reset Warm reset of device
cold-reset Cold reset of device
get-last-err Display information about the last fatal error
init-nvram Initialize NVRAM to default values
get-sw-file Retrieve SNMP agent software file name
set-sw-file Set the SNMP Agent Software file name - for download
get-tftp-srvr Retrieve TFTP download server IP address
set-tftp-srvr Set TFTP download server IP address
set-tftp-mode Set the TFTP download mode
get-tftp-mode Retrieve the TFTP download mode
sw-dnld Begin software download to TFTP server
set-fg-param Set the Ethernet frame generator parameters
start-fg Starts the Ethernet frame generator
stop-fg Stop the Ethernet frame generator