Filter
Top Products
5-1
Chapter 5
IP Commands
This section lists the IP Configuration commands available to the
command line interface. It is separated into different sections to
allow simpler lookup: IP Configuration lists general configuration
commands, Ping lists commands pertaining to the ping ability of the
Agent, Address Resolution Protocol lists ARP-related information.
get-ip
This command shows the device’s current IP address, if any.
If the IP Config has already been defined
SYS_console>get-ip
--IP Config already defined
The device IP address is: 194.090.136.187.
If the device has no IP Address defined.
SYS_console> _
SYS_console>get-ip
-- No IP Config defined
SYS_console>
set-ip
set-ip<IPaddress>