Filter
Top Products
AT-8116 User’s Guide
9-5
Example 3:
SYS_telnet>get-vbc-tbl run
RUNTIME VIRTUAL BROADCAST DOMAIN TABLE
===========================================
0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
VBC - 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
1 : - - - - - - - - + + + + + + + +
SYS_telnet>
This example shows that the current DEFAULT VBC ports are 1, 2, 3, 4,
5,6,7, and 8, As denoted by the (-) in the VBC table.
Example 4:
SYS_telnet>get-vbc-tbl run
RUNTIME Virtual Broadcast Domain Table is empty
SYS_telnet>
This example shows that all the ports are in the DEFAULT VBC, since
NONE are assigned to a designated VBC. The get-vbc-tbl run
command searches for the address in the learning table.
SYS_console>find-lt-addr 01-02-03-04-05-06
MAC Address - 01-02-03-04-05-06 - not in LT
del-lt-entry
del-lt-entry <index>
Deletes the learn table entry at <index>. If the entry delete was
successful or if the entry is not ACTIVE, then the command will be
successful.
Deleting entries with the MGMT field set (+) is prohibited since they
are system addresses.
The del-lt-entry command is very powerful, allowing the user to
change the entire Switching Database with the exception of the
System MAC Addresses. Therefore, it should be used with caution.