Filter
Top Products
Switching Database Commands
9-4
find-lt-addr
SYS_telnet>find-lt-addr 0060e8112265
Entry ---- MAC Address ---- LOCK DPORT MGMT
===============================================
21 00-60-E8-11-22-65 - 16 -
SYS_telnet>
The switch as factory-configured, has default a VBC and a SVLAN
VLAN that contain all 16 ports. Ports in the default VLAN's are
deleted when they are assigned to a designated VLAN. By the use of
the "get-vbc-tbl" or "get-svlan-tbl" command, you can discover the
ports that are in the default VLAN's.
Example 1:
SYS_telnet>get-svlan-tbl run
RUNTIME SECURITY VIRTUAL LANs TABLE
===========================================
0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
SVLAN - 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
1 : - - - - - - - - - - + + + + + + + +
SYS_telnet>
This example shows that the current DEFAULT SVLAN ports, which
are represented by hypens, are ports 1,2,3,4,5,6,7, and 8 as denoted
by the (-) in the SVLAN table.
Example 2:
SYS_telnet>get-svlan-tbl run
RUNTIME Security Virtual LANs Table is empty
SYS_telnet>
This example shows that all the ports are in the DEFAULT SVLAN,
since NONE are assigned to a designated VLAN