Filter
Top Products
Troubleshooting Symptom Charts/External Floppy Drive - 12
Disk does not eject 1 Switch off system and hold trackpad ∑∑button down while
you switch on system.
2 Insert straightened paper clip into hole next to drive opening
to eject disk.
3 Check floppy drive cable connection.
4 Replace floppy drive cable.
5 Replace floppy adapter.
6 Replace floppy drive.
7 Replace logic board.
When replacing the logic board, check that the serial port EMI
clip is attached to the bottom of the CPU stiffener. If it is
missing, replace the stiffener. On international units, also
replace the stiffener if the modem EMI clip is missing. The “CPU
Stiffener” topic in Take Apart helps you locate and identify the
two EMI clips.