Filter
Top Products
Troubleshooting Symptom Charts/Peripherals - 26
Known-good network
printer does not print
1 Verify that System is 7.5.2 or later.
2 Verify that the Chooser and Control Panel settings are
correct.
3 Check that Filesharing is turned on and Network Control is
not set on Apple Remote Access (ARA).
4 Check cables.
5 Replace printer cable.
6 Try know-good printer. If printer works, troubleshoot
network.
7 Replace logic board.
Note:
When replacing the logic board, check that the serial port
EMI clip is attached to the bottom of the CPU stiffener. If it is
missing, replace the stiffener. On international units, also
replace the stiffener if the modem EMI clip is missing. The “CPU
Stiffener” topic in Take Apart helps you locate and identify the
two EMI clips.