Filter
Top Products
66 Chapter 4
Installing an AirPort Card
1 Open the hinged connector panel and insert your card.
2 Plug in the antenna cable and close the hinged connector panel.
Remove the tape holding
the antenna cable down.
Use this latch to release the
hinged connector panel, and
swing the panel open.
The AirPort Card is designed to
fit into the connector only one way.
Insert the card until it is firmly seated.AirPort Card connector
If you want to remove the AirPort Card,
press this tab to lower the two catches
holding the card in place.
Tuck the excess antenna cable into this opening so that it
won’t get snagged when you reinstall the core into the enclosure.
Slip the clear plastic tab attached
to the AirPort Card behind
this component.
Plug the antenna cable into the
hole in the end of the AirPort Card.