Filter
Top Products
71
Category Entry Description Data
Type
Range
Channel The channel number. Shown
in the Group/Port format. Port
2 in group 1 will be shown as
1/2
RW Two groups
and 4 ports for
each group.
1/1
Current Codec
Type
Displays the current codec in
use by the channel
RO
Packet Time
(msec)
Displays the current packet
time in use by the channel
RO
VAD Displays VAD administrative
status
RO
Echo
Cancellation
Displays Echo Cancellation
administrative status
RO
Jitter Buffer
(msec)
Displays how long the jitter
buffer is used in this channel.
If the channel has received no
traffic, the last value that was
used by the previous call will
be displayed. 0 stands for
AUTO jitter buffer.
RO
DTMF Filter Displays DTMF Filter
administrative status
Busy Time
(sec)
Displays the length of time
this channel has beenbusy .
(Includes incoming and
outgoing calls.)Busy time will
be reset when you switch off
the power .
RO
Reset Busy
Time
Check box. If checked and the
refresh button is then clicked,
Busy Time will then be reset.
RW
FXO Loop
Current Lost
Counter
19
Displays the number of
counter that FXO interfaces
can not detect loop current
RO
Clear Loop
Current
Counter
To reset the FXO Loop
Current Counter back to zero
RW
Call Attempt Displays the number of call
attempts that have been
made.
RO
Successful
Outgoing Call
Displays the number of
successful outgoing calls that
have been made.
RO
Incoming Call Displays the total number of
incoming calls
RO
Successful
Incoming Call
Displays the number of
successful incoming calls
RO
19
If the counter is greater than "0", then the Red alarm LED on the front panel will be lit. After it is cleared, the Red Alarm LED will go off.