Filter
Top Products
Enabling/Disabling Ports
Page 3-17
Enabling/Disabling Ports
The enabling or disabling of a port is a manual operation that can be
used to isolate network devices possibly causing problems on the net-
work or to prevent unauthorized use of a port or station.
To enable or disable a port:
1 Click Ports.
You do not need to select any particular item on the front
panel image.
The Port Table appears, similar to Figure 3-15.
Figure 3-15 Port Table
The Port Table displays the current status of each port on
each group within the device. The table contains a
scroll bar that is independent of the browser, which
allows you to view information on all ports in the device.
2 Select the port to be enabled or disabled by clicking
once on the port’s row.
3 Click Modify.
The Modify Dialog box appears.
4 Open the Admin State drop-down menu and select
enable (to enable the port) or disable (to disable the
port).
5 Click Apply.
The port’s state is modified.
Click Refresh to view updated information.
100NMM PM book Page 17 Wednesday, August 27, 1997 12:40 PM