Asante Technologies 100TX Switch User Manual


 
Menus
Page 4-20
Security
This menu is not a management option; it is a title for the sub-menus
listed below it. This menu CANNOT be selected.
Port Security
This menu allows you to control access to ports by specifying the physi-
cal addresses that are allowed to connect to certain ports. If an unau-
thorized physical address attempts to connect to the restricted port, an
action (such as partition the port, send a trap, etc) can occur.
Table 4-15 describes each field in the Port Security menu.
Note: For instructions on using this menu, see “Setting Port
Security” on page 3-28.
Table 4-15 Port Security Menu
Field Description
Group Index Read-only field; displays the number of the group
selected.
Port Index Read-only field; displays the number of the port on
the group.
Status Configurable field; determines the status of the entry.
valid — entry is active.
invalid — entry is inactive (deletes the entry).
Allowed Address Configurable field; displays the physical address that
is allowed to connect to the specified port.
Violation Action Configurable field; the action to occur if the physical
address does not match the Allowed Address.
partitionport — partitions the target port.
sendtrap — sends a trap to the receiving sta-
tion.
partitionportANDsendtrap — partitions the
target port and sends a trap.
sendtrapANDrequestpage — sends a trap and
sends a page to the network administrator (if
the trap receiving station is an AsantéView
Management Station).
partitionportANDsendtrapANDrequestpage
— partitions the target port, sends a trap, and
send a page to the network administrator .
100NMM PM book Page 20 Wednesday, August 27, 1997 12:40 PM