Filter
Top Products
Network
Page 4-9
Network
This menu provides configurable network access information for the
device’s management module. This information is needed to access the
device across the network (in-band management).
Table 4-7 describes each field in the Network menu.
▲ Important: If you change the IP address, subnet
mask, or default gateway, the management module
needs to be reset in order for the changes to take
effect. See “Resetting a Group or Device ” on page 3-
20 for instructions.
∆ Note: For instructions on using this menu, see “Configur-
ing Network Access Parameters” on page 3-10.
Table 4-7 Network Menu
Field Description
Agent’s IP Address Configurable field; displays the IP address of the man-
agement module’s SNMP agent.
Subnet Mask Configurable field; displays the subnet address of the
device.
Note:
A subnet mask, in the IP addressing scheme, is
a group of selected bits whose values serve to identify
a subnetwork. All members of the subnetwork share
the mask value.
Default Gateway Configurable field; displays the address of the default
gateway to which the device belongs.
Boot Server Configurable field; displays the IP address of the boot
server that was used for booting the IP agent.
Dial String Configurable field; displays the initialization string
used by the network management station to establish
an out-of-band connection with the device.
Baud Rate Configurable field; displays the baud rate for access-
ing the device via out-of-band management.
The default is 9600.
100NMM PM book Page 9 Wednesday, August 27, 1997 12:40 PM