Filter
Top Products
Configuring IP Information
Page 4-5
Configuring IP Information
To configure and/or manage an IntraStack over the network, the IntraSt-
ack 6014DSB needs to be properly configured with IP information (such
as the device’s IP address, subnet mask, and default gateway address).
This information is initially set-up in the IntraStack 6014DSB via the
unit’s console port; however, some information can be modified using
IntraSpection.
To configure the IntraStack 6014DSB’s IP information:
1 Do not select any item on the Device Page’s front-panel
image. (This selects the entire device.)
2 Click IPAgent.
The IP Agent Protocol Group table appears, similar to Fig-
ure 4-4.
Figure 4-4 IP Agent Protocol Group table
3 Click once in the IP Agent field to be edited.
▲ Important: Only those fields that are colored
white can be edited.
For a description of each field, see “IP Agent “ on page 5-7.
4 Type the new information.
5 Click Apply.
The IntraStack’s IP information is configured. Click
Refresh to view updated information.
Book Page 5 Thursday, September 18, 1997 4:28 PM