Filter
Top Products
AutoNegotiate
Page 5-15
AutoNegotiate
This menu displays configurable and read-only auto-negotiation informa-
tion on each of the device’s ports.
Table 5-11 describes each field in the AutoNegotiate menu.
∆ Note: For instructions on using this menu, see “Config-
uring Auto Negotiation” on page 4-11.
Table 5-11 AutoNegotiate Menu
Field Description
GrpIndex Read-only field; displays the number of the group for
which information is displayed.
PortIndex Read-only field; displays the number of the port for
which information is displayed.
AdminState Configurable field; determines the auto-negotiation
status of the port.
❏ enable — the port is enabled for auto-negotia-
tion.
❏ disable — the port’s auto-negotiation ability is
disabled.
RemoteAble Read-only field; displays the auto-negotiation capabil-
ities of the connected device (remote device).
❏ able — auto-negotiation capabilities are
enabled.
❏ not_able — auto-negotiation capabilities are
not enabled.
AutoConfig Read-only field; indicates whether auto-negotiation
signaling is in progress or has completed.
Book Page 15 Thursday, September 18, 1997 4:28 PM