Filter
Top Products
Configuring the Spanning Tree Protocol
Page 4-27
Figure 4-16 Port Control table
2 Select the port you want to disable or enable Span-
ning Tree on by clicking once on its row.
3 Click Modify.
The “Modify Dialog” box appears.
4 Open the STP drop-down menu and select Disable
(to disable Spanning Tree on the port) or Enable (to
enable Spanning Tree on the port).
5 Click Apply.
Spanning Tree is disabled (or enabled) on the selected port.
Book Page 27 Thursday, September 18, 1997 4:28 PM