Filter
Top Products
Management
Page 4-8
Configuring Device Identification Information
To help with identification, you can add certain details about the IntraSt-
ack; such as, the device’s name, location, and contact information.
To configure device identification information:
1 Do not select any item on the Device Page’s front-panel
image. (This selects the entire device.)
2 Click Identify.
The Device Identification table appears, similar to Figure
4-6.
Figure 4-6 Device Identification table
3 Click once in the Name, Location or Contact field
to be edited.
∆ Note: For a description of all the fields, see
“Identify “ on page 5-4.
▲ Important: Only those fields that are colored
white can be edited.
4 Type the new information.
A maximum of 254 characters (including spaces) is
allowed.
5 Click Apply.
The IntraStack’s identification information is configured.
Click Refresh to view updated information.
Book Page 8 Thursday, September 18, 1997 4:28 PM