Filter
Top Products
Downloading a Configuration File
Page 4-23
Downloading a Configuration File
The IntraStack’s configuration file can be downloaded to the device via
IntraSpection.
To download a configuration file:
1 Make sure the IntraStack is configured with valid boot
information.
See “Set up the Boot Information” on page 4-20 for instruc-
tions.
2 Click swAgentSW.
The Switch Agent Software Group table appears.
3 Open the Up/Download Action drop-down menu
and select Download.
4 Open the Download File drop-down menu and
select Config-File.
5 Type the server’s IP address where the configuration
file resides in the Config Server field.
6 Type the name of the configuration file in the Config
File Name field.
7 Type the number of attempts the IntraStack will
make to download the file in the Config Retries
field.
8 Open the Active Image Bank drop-down menu and
select the image bank that will receive the down-
loaded configuration file.
∆ Note: The IntraStack 6014DSB has two image
areas (or “banks”) where its runtime software is
stored:
❏ Active Image Bank — the bank that is used
during the system boot-up (also referred to as
“Boot Bank”
❏ Download Bank — the bank that receives the
new file when it is downloaded (also referred to
as “Destination Bank”).
Book Page 23 Thursday, September 18, 1997 4:28 PM