Filter
Top Products
GroupInfo
Page 5-17
GroupInfo
This menu displays configurable and read-only information on each of
the device’s groups.
Table 5-12 describes each field in the GroupInfo menu.
Table 5-12 GroupInfo Menu
Field Description
Index Read-only field; displays the number of the entry in
the Group Basic Info Table.
Physical Addr Read-only field; displays the ID of this group (it uses
the MAC address of the first port in this group as the
ID).
State Configurable field; enables or disables the group
within the device stack.
Ports Read-only field; displays the number of ports (includ-
ing MII expansion ports) contained in this group.
Module Type Read-only field; displays the type of module of the
selected group.
Description Read-only field; displays a description of this group.
FanStatus Read-only field; displays the status of the group’s fan.
❏ normal — the fan is in good condition
❏ no-fan — no fan is in this module
❏ fail — the fan is in “failed’ condition
❏ fan-1 bad — fan #1 is in “failed” condition
❏ fan-2 bad — fan #2 is in “failed” condition
❏ fan-1-2 bad — fan #1 and fan #2 are in
“failed” condition
ExpPorts Read-only field; displays the number of expansion
ports in this group.
LastChange Read-only field; displays the sysUpTime of last
change of group status since this group has been in
operation.
Reset Configurable field; resets the selected group.
Book Page 17 Thursday, September 18, 1997 4:28 PM