Filter
Top Products
GigaX Series L3 Managed Switch User Guide
105
CLI command : filter rule modify <set id> <rule id> <protocol:
ICMP/TCP/UDP/any> <action: permit/deny>
CLI command : filter rule dstmac <set id> <rule id> <type: (any/[mac
address])>
CLI command : filter rule srcmac <set id> <rule id> <type: (any/[mac
address])>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]
[Destination Port] [Type/Port]
[Protocol] [ICMP/TCP/UDP/ANY]
[Modify]
Allows user to modify the IP filter rule.
CLI command : filter rule modify <set id> <rule id> <protocol:
ICMP/TCP/UDP/any> <action: permit/deny>
CLI command : filter rule dstip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command : filter rule srcip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command : filter rule dstport <set id> <rule id> <type: (any/[port])>
CLI command : filter rule srcport <set id> <rule id> <type: (any/[port])>