Filter
Top Products
26
Enter your user name and password, and then click
to enter
the Configuration Manager. Use the following defaults the first time
you log into this interface:
Default User Name: admin
Default Password: (no password)
You can change the password at any time (see section
5.3.1 System Commands).
3. To setup a new IP address, click “System”, then “IP Setup” (see
Figure 7). Fill in the IP address, network mask and default gateway,
then click
.
4. If your new address is different from the default, the browser can not
update the switch status window or retrieve any page. This is
normal. You have to retype the new IP address in the
address/location box, and press <Enter>. The WEB link returns.
5. To enable authentication for Web access, click “Administration” on
the menu list, then select “Enabled” to start the protection.
A login window appears immediately after you click
. See the
figures on the next page.
Figure 7. IP Setup