Filter
Top Products
GigaX Series L3 Managed Switch User Guide
73
4.9.3 RADIUS
In order to use external RADIUS server, the following parameters are
required to be setup:
• Authentication Server IP: The IP address of the RADIUS server.
• Authentication Server Port: The port number for the RADIUS server
is listening to.
• Authentication Server Key: The key is used for communications
between GigaX and the RADIUS server.
• Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must be
the same as the VLAN of the system management interface.
Click
to make the settings permanent. Click to
refresh the settings to current value.
Figure 44. RADIUS