Asus NCCH-DR Computer Hardware User Manual


 
4-404-40
4-404-40
4-40
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
4.6.54.6.5
4.6.54.6.5
4.6.5
Boot Settings ConfigurationBoot Settings Configuration
Boot Settings ConfigurationBoot Settings Configuration
Boot Settings Configuration
Boot Other Device [Enabled]
Quick Power On Self Test [Enabled]
Halt On [All Errors]
Case Open Warning [Enabled]
Boot Up Floppy Seek [Enabled]
Boot Up NumLock Status [On]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Full Screen LOGO Show [Enabled]
Boot Settings Configuration Select Menu
Item Specific Help
Select your Boot Device
Priority.
4.6.44.6.4
4.6.44.6.4
4.6.4
CD-ROM Boot PriorityCD-ROM Boot Priority
CD-ROM Boot PriorityCD-ROM Boot Priority
CD-ROM Boot Priority
Boot Other Device [Enabled]Boot Other Device [Enabled]
Boot Other Device [Enabled]Boot Other Device [Enabled]
Boot Other Device [Enabled]
Allows you to enable or disable selection of other boot device.
Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]Quick Power On Self Test [Enabled]
Quick Power On Self Test [Enabled]Quick Power On Self Test [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping
retesting a second, third, and fourth time. Configuration options: [Disabled]
[Enabled]
1. 1st Slave : ASUS CD-S520/A
CD-ROM Boot Priority Select Menu
Item Specific Help
Use <up> or <down>
arrow to select a
device, then press <+>
to move it up, or <->
to move it down the
list. Press <ESC> to
exit this menu.