Asus NCCH-DR Computer Hardware User Manual


 
ASUS NCCH-DRASUS NCCH-DR
ASUS NCCH-DRASUS NCCH-DR
ASUS NCCH-DR
2-312-31
2-312-31
2-31
8.8.
8.8.
8.
SSI SSI
SSI SSI
SSI
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
8 8
8 8
8
-pin -pin
-pin -pin
-pin
ATX12V1ATX12V1
ATX12V1ATX12V1
ATX12V1
))
))
)
These connectors are for SSI power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
Use of an SSI 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450 W is recommended
for a fully-configured system.
Do not forget to connect the 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
NCCH-DR
NCCH-DR Power connectors
For Power Supply
with 20-pin
Power Connector
24-pin Power Connector
GND+12V CPU2
GND+12V CPU2
GND+12V CPU1
GND+12V CPU1
8-pin
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
1
Ground