Filter
Top Products
ASUS NCCH-DRASUS NCCH-DR
ASUS NCCH-DRASUS NCCH-DR
ASUS NCCH-DR
4-274-27
4-274-27
4-27
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA [Auto]
SATA Mode IDE
Serial ATA Port0 Mode SATA0 master
Serial ATA Port1 Mode SATA1 master
SATA Configuration
Select Menu
Item Specific Help
[Disabled]: Disable
SATA Controller.
[Auto]: Auto-arrange
the BIOS.
[Combined Mode]: PATA
and SATA are combined.
Max. of 2 IDE drives on
each channel.
[Enhanced Mode]: Enable
both SATA and PATA.
Max. of 6 IDE drives
are supported.
[SATA Only]: SATA is
opeating in legacy
mode.
SATA ConfigurationSATA Configuration
SATA ConfigurationSATA Configuration
SATA Configuration
***On-Chip Serial ATA Setting******On-Chip Serial ATA Setting***
***On-Chip Serial ATA Setting******On-Chip Serial ATA Setting***
***On-Chip Serial ATA Setting***
The SATA Mode and Serial ATA Port0 Mode items are configurable
only when the On-Chip Serial ATA item is set to [ Combined Mode]
[Enhanced Mode] or [SATA Only].
On-chip Serial ATA [Auto]On-chip Serial ATA [Auto]
On-chip Serial ATA [Auto]On-chip Serial ATA [Auto]
On-chip Serial ATA [Auto]
This item allows you to configure your serial ATA devices, if present.
Configuration options: [Disabled] [Auto] [Combined Mode]
[Enhanced Mode] [SATA Only]
a. Setting to [
AutoAuto
AutoAuto
A ut o] allows BIOS to automatically configure the SATA
devices.
b. Setting to [
Combined ModeCombined Mode
Combined ModeCombined Mode
Combined Mode] allows you to install parallel ATA and
serial ATA devices at the same time. You may install
two IDEtwo IDE
two IDEtwo IDE
two IDE
devices on any of the parallel ATA channelsdevices on any of the parallel ATA channels
devices on any of the parallel ATA channelsdevices on any of the parallel ATA channels
devices on any of the parallel ATA channels, and
one IDEone IDE
one IDEone IDE
one IDE
device on each serial ATA channeldevice on each serial ATA channel
device on each serial ATA channeldevice on each serial ATA channel
device on each serial ATA channel for a maximum of
fourfour
fourfour
four
devices. Use ths option when you installed a legacy operating system
like MS-DOS, Windows ME/98/NT4.0.
c. Setting to [
Enhanced ModeEnhanced Mode
Enhanced ModeEnhanced Mode
Enhanced Mode] allows you to install parallel ATA and
serial ATA devices at the same time, with a maximum of
six six
six six
six IDE
devices on each channel. Use this option when you installed a native
operating system like Windows 2000/XP.
d. Setting to [
SATA OnlySATA Only
SATA OnlySATA Only
SATA Only] allows you to install IDE devices on the
Serial ATA channels only.
e. Setting to [
DisabledDisabled
DisabledDisabled
Disabled] disables the onboard SATA controller. The
RAID feature is also disabled.