Filter
Top Products
2-242-24
2-242-24
2-24
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
7.7.
7.7.
7.
Gigabit LAN controller settingGigabit LAN controller setting
Gigabit LAN controller settingGigabit LAN controller setting
Gigabit LAN controller setting
(3-pin LAN_EN1; LAN_EN2)(3-pin LAN_EN1; LAN_EN2)
(3-pin LAN_EN1; LAN_EN2)(3-pin LAN_EN1; LAN_EN2)
(3-pin LAN_EN1; LAN_EN2)
These jumpers allow you to enable or disable the onboard Gigabit LAN
controllers. The LAN_EN1 jumper is for the Intel
®
82547GI Gigabit
LAN controller (CSA) that controls the LAN1 port. The LAN_EN2
jumper is for the Intel
®
82541GI Gigabit LAN controller (32-bit) that
controls the LAN2 port. Place the jumper caps on pins 1-2 to activate
the Gigabit LAN controller.
NCCH-DR
NCCH-DR LAN_EN1 setting
LAN_EN1
Enable
(Default)
Disable
23
12
NCCH-DR
NCCH-DR LAN_EN2 setting
Enable
(Default)
Disable
23
12
LAN_EN2
6.6.
6.6.
6.
SATA controller LED setting (3-pin 8130LED1)SATA controller LED setting (3-pin 8130LED1)
SATA controller LED setting (3-pin 8130LED1)SATA controller LED setting (3-pin 8130LED1)
SATA controller LED setting (3-pin 8130LED1)
This jumper allows you to enable or disable the SATA controller LED
indicator in the chassis front panel.
NCCH-DR
NCCH-DR 8130 LED setting
8130 LED1
Disable
(Default)
Enable
23
12
PANEL1
8130 LED1
RECOVERY
HDLED