Filter
Top Products
ASUS PU-DLS/PU-DL motherboard user guide
5-23
B. Installing Windows XP (32-bit) with an Ultra320 SCSI
Controller
Follow these steps to install Windows XP (32-bit) for the first time with an
Ultra320 SCSI controller.
1. Start your system with the Windows XP Boot CD-ROM in the
CD-ROM drive. NOTE: When using a CD-ROM drive to install
Windows XP from the bootable CD-ROM, make sure Bootable
CD-ROM support is enabled. This is done through the System BIOS
Setup Utility.
2. Press F6 when this message appears:
“Press F6 if you need to install third-party SCSI drivers”
3. When prompted, press “S” to supply the new driver.
4. Insert the Adaptec Ultra320 FMS driver disk when the setup prompts
you to insert the manufacturer supplied disk into drive A, and then
continue.
5. The screen displays the adapter drivers supported on the disk. Select
Adaptec Ultra320 SCSI Cards (WinXP IA32) and press Enter.
Continue with the rest of the Windows installation.
6. Your system will reboot once more to finish setting up the operating
system.
C. Installing Windows XP (64-bit) with an Ultra320 SCSI
Controller
Follow these steps to install Windows XP (64-bit) for the first time with an
Ultra320 SCSI controller.
1. On the disk, rename the TXTSETUP.OEM on the root directory to
something like TXTSETUP.I32, and copy the TXTSETUP.OEM file
from the \WINXP64\ directory to the root directory. NOTE: If you want
to use this disk for installation of Windows XP (32-bit) in the future,
the previous TXTSETUP.OEM file will need to be restored.
2. Start your system with the Windows XP Boot CD-ROM in the
CD-ROM drive.
You will need to modify the Adaptec Ultra320 FMS driver disk in order
to properly install Windows XP 64-bit Edition.