Filter
Top Products
ASUS PU-DLS/PU-DL motherboard user guide
4-5
4.2 BIOS Setup program
This motherboard supports a programmable firmware hub (FWH) that you
can update using the provided utility described in section “4.1 Managing
and updating your BIOS.”
Use the BIOS Setup program when you are installing a motherboard,
reconfiguring your system, or prompted to “Run Setup”. This section
explains how to configure your system using this utility.
Even if you are not prompted to use the Setup program, you may want to
change the configuration of your computer in the future. For example, you
may want to enable the security password feature or make changes to the
power management settings. This requires you to reconfigure your system
using the BIOS Setup program so that the computer can recognize these
changes and record them in the CMOS RAM of the FWH.
The FWH on the motherboard stores the Setup utility. When you start up
the computer, the system allows you to run this program using either one
of the following methods:
• Press Delete during the Power-On Self Test (POST) to enter the Setup
utility. If you don’t press Delete, POST continues with its test routines,
then enter the operating system.
• Press F6 once then press Delete during POST to enter Setup faster.
If you wish to enter Setup after POST, restart the system by pressing the
key combination Ctrl-Alt-Delete, or by pressing the reset button on the
system chassis. You can also restart by turning the system off and then
back on. Do this last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. It is
a menu-driven program, which means you can scroll through the various
sub-menus and make your selections among the predetermined choices.
Because the BIOS software is constantly being updated, the following
BIOS setup screens and descriptions are for reference purposes only,
and may not exactly match what you see on your screen.