Filter
Top Products
ASUS TR-DLS User’s Manual 103
5. OS Driver Installation
5. Driver Installation
II. Intel 82550 Network Driver Installation
SCO UnixWare 7.1.1 system can correctly recognize Intel 82550 network controller
during installation. User doesn’t need to load or modify the network driver for the
onboard LAN device.
User also can find the Intel 82550 Network driver from ASUS Driver Support CD
at:
\Drivers\Lan\UNIX\UW7DDI8
It is not necessary, nor recommended, to remove previous versions of this package
from the system before installing this updated version. To install this package, you
may use the scoadmin Application Installer from the desktop, or as a root login with
pkgadd command.
1. Copy the eeE8.pkg file into any directory on the UnixWare system, such as
in the /tmp directory.
2. Make sure no other users are logged on and all user applications are closed.
3. If there is an older version of the eeE driver on the system, first run ‘netcfg’
and remove any configured NICs. Exit ‘netcfg’. Remove the old driver by
typing ‘pkgrm eeE’. (You can find the driver version by typing ‘pkginfo -l
eeE’).
4. Install the new driver using ‘pkgadd’. For example:
# pkgadd -d /tmp/eeE8.pkg
5. Run ‘netcfg’ to add and configure the NICs.
6. Reboot the system.
NOTE: If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver
must be used. The DDI 8 driver is supported on UnixWare 7.1.0 and
later versions. For more information about Hot Plug PCI capabilities
please refer to SCO UnixWare 7 documentation.
III. ATI Rage XL Display Driver Installation
SCO UnixWare 7.1.1 system can correctly recognize ATI Rage XL graphic controller
(ATI MACH64) during installation. User doesn’t need to load or modify the video
driver for the onboard VGA device.
SCO UnixWare Server